This page covers: 1528, 1528A, A-PL-1528
Check the code on the back of your box, near the barcode.
Ages: 12 and up · About 45-90 minutes · Some patience needed · Wipe-clean

Watch how it's done:

What's in your kit:

• 5 PRISMIC™ Panels

• 1 USB LED String Light (USB Power Adapter Not Included)

• Connecting Pins

• 1 Hanger

• 1 Instruction Booklet

• Video Instructions Included

Before You Begin

• Set up your work area first on a clean, flat surface.
• Lay out everything in the kit so it's all within reach before you begin.
• Remove the protective plastic film from both sides of each panel before folding.
• Keep the locking pins and pointed bamboo stick nearby.
• Set the LED light string aside until you need it later.
• Check the number printed on each panel so you can match it to the instructions.
• Remember:
  • Red fold lines fold toward you.
  • Blue fold lines fold away from you.
  • Tabs always go on the inside.
• Use the pointed bamboo stick carefully when removing the small plugs from the connecting holes. 

Step 1: Lay Out the Panels

• Place Panels 1, 2, 3, and 4 on your work surface.
• Arrange them according to their panel numbers.
• Keep the locking pins within easy reach. 

Step 2: Fold and Connect Panel 1

• Pick up Panel 1.
• Fold along the red and blue crease lines.
• Line up the matching flat edges and tabs.
• Push a locking pin through the flat edge first.
• Line up the matching tab and push the pin through to lock the pieces together.
• Continue until all the required connections are made.
• Set the completed first heart section aside. 

Step 3: Fold and Connect Panel 2

• Pick up Panel 2.
• Fold along the red and blue crease lines.
• Connect the matching flat edges and tabs with locking pins.
• Continue until the second section of the heart is complete. 

Step 4: Join the First Two Sections

• Take the completed sections from Panels 1 and 2.
• Line up the matching flat edges and tabs.
• Connect them using locking pins.
• Make sure the pointed bottom of the heart faces away from the sections you are connecting. 

Step 5: Fold Panel 3

• Pick up Panel 3.
• Fold along the red and blue lines.
• Connect the matching sections with locking pins.
• Continue until Panel 3 forms the third section of the heart. 

Step 6: Attach Panel 3

• Line up Panel 3 with the two sections already connected.
• Position the pieces so they begin forming the two rounded sections at the top of the heart.
• Connect the matching flat edges and tabs with locking pins.
• About halfway through, stop and prepare to add the LED light string. 

Step 7: Add the LED Light String

• Find the thicker section of the LED light wire.
• Run it through the center point between the two top peaks of the heart.
• Tie a knot where the thick wire meets the thin wire.
• Keep the knot on the inside of the heart.
• Continue connecting the remaining edges and tabs.
• Leave the indicated tab with two holes open.
• Gently uncoil the LED light string.
• Spread the lights evenly throughout the inside of the heart. 

Step 8: Fold Panel 4

• Pick up Panel 4.
• Fold it along the red and blue crease lines.
• Connect its matching edges and tabs with locking pins.
• Make sure the shape matches the illustrated panel before attaching it to the heart. 

Step 9: Close the Heart

• Line up Panel 4 with the main heart shape.
• Start connecting from the top.
• Work your way around the sides, attaching the flat edges to the matching tabs.
• Leave the connections near the bottom access hole until last.
• Make sure the LED lights stay inside and are spread evenly.
• Finish the remaining connections with locking pins.
• Your PRISMIC Hanging Heart is now assembled.

Step 10: Add the Hanging Hook

• Take the optional hanging hook.
• Fold the middle part of the hook toward the small pin.
• Slide the light wire between the pin and the folding section.
• Snap the circular part of the hook onto the pin.
• Adjust the hook position if needed.

Step 11: Light It Up

• Plug the LED light string into a USB power port.
• Make sure the heart is securely assembled.
• Hang or display your finished PRISMIC Heart Lantern and enjoy the glowing effect.

Safety:

WARNING: Choking Hazard. Small Parts. Not for children under 3 years.

Prefer to print it?

Download the PDF instructions for Prismic Hanging Heart Lantern

Something missing or damaged?

Tell us the code on your box and what happened,
and we'll make it right. Get in touch.