This page covers: 2389, 2389A, A-PL-2389
Check the code on the back of your box, near the barcode.
Ages: 6 and up · About 45-90 minutes · Some patience needed · Wipe-clean

Watch how it's done:

What's in your kit:

Before You Begin

• Set up your work area first. Lay down paper towels to catch drips and spills.
• Lay out everything in the kit so it's all within reach before you begin.
• Choose a clean, flat surface to work on.
• Ask an adult for help when using the lights.
• Both mirrors are made of acrylic, not glass.
• The USB cable must be plugged into a USB port or a certified 5V adapter. The adapter is not included.

Step 1: Insert the First Mirror

• Peel off the protective film covering the shiny side of the back mirror.
• Slide the back mirror into the back groove of the wooden frame.
• Make sure the shiny side faces forward so the lights and decorations will be placed in front of it.

Step 2: Add the Lights

• Find the two grooves inside the wooden frame.
• Keep the back mirror in the rear groove.
• Leave the front groove empty for the see-through mirror, which will be added later.
• Place a glue dot in each corner of the frame.
• Peel the backing off the LED light strip.
• Starting at the bottom, thread the USB wire through the hole in the back mirror.
• Press the LED strip around the inside edge of the frame.
• Press the strip firmly onto the glue dots so it stays in place.
• Place one glue dot where the LED strip ends and the cord begins to help keep the cord secure.

Step 3: Decorate Your Mirror

• Use craft glue to attach embellishments directly onto the back mirror.
• Use the alphabet beads to spell your name or a favorite word.
• Add hearts, flowers, butterflies, or other designs you like.
• Plan your design before gluing everything in place.
• Leave some open space around the LED light strip so the decorations do not cover the lights.
• Start with a few decorations and add more later if you want.

Step 4: Add the Magic Mirror

• Gently peel the protective plastic film from both sides of the semi-reflective, see-through mirror.
• Carefully slide the mirror into the front groove of the wooden frame.
• Position it directly in front of the decorated back mirror and LED lights.
• Make sure it sits securely in the frame.

Step 5: Decorate the Frame

• Use craft glue to attach beads or embellishments around the outer edges of the wooden frame.
• Add as many decorations as you like to personalize your infinity mirror.
• Allow the glue to dry before moving or using the mirror.

Step 6: Turn On Your Infinity Mirror

• Plug the USB cable into a suitable power source.
• Switch on the LED lights.
• Watch the light reflect between the two mirrors to create an endless glowing tunnel effect.
• Place your finished infinity mirror on a shelf, desk, or nightstand to display it.

Safety:

WARNING: Choking Hazard. Small Parts. Not for children under 3 years.

Prefer to print it?

Download the PDF instructions for Infinity Mirror Kit

Something missing or damaged?

Tell us the code on your box and what happened,
and we'll make it right. Get in touch.