This page covers: 2662, 2662A, A-PL-2662
Check the code on the back of your box, near the barcode.
Ages: 6 and up · About 30-60 minutes · Easy

Watch how it's done:

What's in your kit:

• 1 LCD Doodle Tablet
• 1 Fidget Squishy Cube (3.5cm x 3.5cm)
• 1 Tin of Magnet Building Tiles
• 1 Noodle Fidget Toy
• Sticky Googly Eyes
• 1 Marker
• 1 Games on the Go Card
• 1 Clear Zipped Carry Pouch
• Vinyl Window Cling Stickers
• Wax Craft Sticks
• 1 Instructions and Inspiration Booklet
• Air Dry Clay
• Square Paper (20cm x 20cm)

Before you start:

• Set up your work area first. Lay down paper towels to catch drips and spills.
• Lay out everything in the kit so it's all within reach before you begin.
  
• Remove all activities and supplies from the clear zipped carry pouch.
  
• Keep small pieces together so they do not get lost during travel.
• Have an adult help younger children with activities that include small parts.

Steps:

1. LCD Doodle Tablet

Step-by-Step Instructions

• Step 1: Use the LCD doodle tablet to draw, write or doodle.
• Step 2: Sketch pictures, practise letters or use it to play games.
• Step 3: Check the included Games on the Go card for more activity ideas.
• Step 4: When you are finished, press the clear button once to erase the screen.
• Step 5: Start again and create something new.

Important Safety Notes

• The tablet contains one CR2025 coin cell battery.
• Adult assembly is required for the battery compartment.
• Do not allow children to access the battery compartment.
• Battery replacement must be performed by an adult.
• Keep new and used coin cell batteries away from children.
• Do not recharge non-rechargeable batteries.
• Do not mix different battery types or new and used batteries.
• Do not short-circuit the terminals.
• Remove batteries if the product is damaged or not working properly.
• Dispose of used batteries according to local regulations.
• If a battery is swallowed, seek emergency medical attention immediately.

2. Magnetic Building Fun Tiles

Step-by-Step Instructions

• Step 1: Choose the magnetic tiles you want to use.
• Step 2: Connect the magnetic edges of the tiles together.
• Step 3: Create towers, scenes, shapes or your own mini world.
• Step 4: Build flat 2D pictures or connect the tiles to make 3D creations.
• Step 5: When travelling, build on the lid or sides of the kit to help keep your creation from sliding around.
• Step 6: Try making flat pictures on the lid or taller structures that grip the bottom.
• Step 7: Take your creation apart and build something new.

Important Safety Notes

• This product contains magnets or magnetic components.
• Magnets that stick together or attach to metal through skin can cause serious internal injuries.
• Seek immediate medical attention if magnets are swallowed or inhaled.

3. Fidget Squishy Cube

Step-by-Step Instructions

• Step 1: Hold the squishy cube in your hand.
• Step 2: Squish, stretch or squeeze it.
• Step 3: Continue playing with it whenever you want some movement or something to keep your hands busy.
• Step 4: Handle it gently to help prevent damage.

Important Safety Notes

• Choking hazard due to small parts.
• Not for children under 3 years.
• Do not put the toy in your mouth, chew it or swallow it.
• Do not throw, excessively bend or forcefully stretch the toy.
• Discontinue use and discard immediately if damaged.

4. Noodle Maze Fidget Toy

Step-by-Step Instructions

• Step 1: Arrange the noodles on the board.
• Step 2: Create your own patterns or trace the maze.
• Step 3: Use the grid to help guide your shapes.
• Step 4: Fill the board with your own designs.
• Step 5: When you are finished, pull the noodles out.
• Step 6: Rearrange them and create a new design.

Important Safety Notes

• Choking hazard due to small parts.
• Not for children under 3 years.
• Do not put the toy in your mouth, chew it or swallow it.
• Handle gently to prevent damage.

5. Vinyl Window Cling Stickers

Step-by-Step Instructions

• Step 1: Choose the window clings you want to use.
• Step 2: Stick them onto a window to decorate it and begin your travel countdown.
• Step 3: As you get closer to your destination, peel the clings off one at a time.
• Step 4: Use the time marker clings if they match your travel time.
• Step 5: You can also use the encouraging word clings during your trip.
• Step 6: Watch your progress as more clings are removed.
• Step 7: Save the reusable clings so you can use them again on another trip.

6. Wax Craft Sticks: General Use

Step-by-Step Instructions

• Step 1: Choose the wax craft sticks you want to use.
• Step 2: Bend, twist and shape the sticks into your desired design.
• Step 3: Press the sticks together to connect them.
• Step 4: Create flat designs or build 3D creations by layering and wrapping the sticks.
• Step 5: Flat creations can also be placed on a window.
• Step 6: When you are finished, pull the sticks apart.
• Step 7: Reshape them to create something new.

7. Wax Craft Sticks: Butterfly

Step-by-Step Instructions

• Step 1: Choose one wax craft stick for the butterfly's body.
• Step 2: Shape it into a short, thicker body as shown in the booklet.
• Step 3: Choose another stick and coil it into an oval shape to make the first top wing.
• Step 4: Press the wing onto one side of the body.
• Step 5: Coil another stick into a matching oval.
• Step 6: Press the second top wing onto the other side of the body.
• Step 7: Use two more sticks to make two smaller oval shapes for the bottom wings.
• Step 8: Attach one smaller wing below each top wing.
• Step 9: Take another stick and bend it into a U shape.
• Step 10: Attach the U-shaped stick to the top of the butterfly to create the antennae.
• Step 11: Press all the pieces together gently to keep your butterfly connected.

8. Wax Craft Sticks: Explorer Glasses

Make the Frames

• Step 1: Take two wax craft sticks.
• Step 2: Twist them together to make a stronger frame.
• Step 3: Bend the twisted sticks into a circle.
• Step 4: Press the ends together to close the circle.
• Step 5: Repeat these steps to make a second circle.

Connect the Frames

• Step 6: Place the two circles next to each other.
• Step 7: Take another wax craft stick and bend it into a U shape.
• Step 8: Place the U-shaped stick between the two circles.
• Step 9: Wrap each end around one of the circles to connect them.
• Step 10: If the connecting stick is still long, wrap it around again.

Make the Arms

• Step 11: Take two wax craft sticks and bend them into curved lines.
• Step 12: For thicker arms, twist a few sticks together before shaping them.
• Step 13: Attach one arm to each side of the glasses.
• Step 14: Curve the ends so they can sit along the sides of your head.
• Step 15: Hold the glasses up to your face and see how they look.

9. Sticky Googly Eyes

Step-by-Step Instructions

• Step 1: Choose where you would like to place the googly eyes.
• Step 2: Use them on your craft creations or other suitable objects around you.
• Step 3: Press the googly eyes onto the surface.
• Step 4: Only use them on smooth surfaces where they can be easily removed.

Important Safety Notes

• Choking hazard due to small parts.
• Not for children under 3 years.
• Do not put the googly eyes in your mouth.
• Do not chew or swallow them.

10. Make a Paper Fortune Teller

You Will Need

• One square piece of paper
• Marker

Fold the Paper

• Step 1: Fold one corner of the square paper to the opposite corner to make a triangle.
• Step 2: Press along the fold, then open the paper again.
• Step 3: Fold the other corners the same way, one at a time, opening the paper after each fold.
• Step 4: When opened, the fold lines should form an X across the paper.
• Step 5: Fold the paper in half by bringing the top edge down to the bottom edge.
• Step 6: Press the fold, then open the paper.
• Step 7: Turn the paper and fold it in half again in the other direction.
• Step 8: Open the paper. All the fold lines should meet in the centre.
• Step 9: Fold one corner into the centre where the lines cross.
• Step 10: Press it flat.
• Step 11: Repeat with the other three corners.
• Step 12: The paper should now look like a smaller square.
• Step 13: Flip the paper over.
• Step 14: Fold all four corners into the centre again.
• Step 15: Press the folds flat to create an even smaller square.

Add the Numbers, Colours and Fortunes

• Step 16: Write the numbers 1 to 8 on the small triangles.
• Step 17: Write the names of four colours on the outside flaps.
• Step 18: Lift each numbered flap.
• Step 19: Write one short fortune underneath each numbered flap.
• Step 20: Keep the writing small enough to fit.
• Step 21: Add eight fortunes in total.

How to Play

• Step 1: Slide your fingers under the flaps.
• Step 2: Ask someone to choose a colour.
• Step 3: Spell the colour aloud while moving the fortune teller once for each letter.
• Step 4: Move the fortune teller sideways for one letter, then forward and back for the next, alternating as you spell.
• Step 5: Ask the player to choose a number.
• Step 6: Count the number aloud while moving the fortune teller.
• Step 7: Ask the player to choose one final number.
• Step 8: Lift the matching flap.
• Step 9: Read the fortune written underneath.

11. Air Dry Clay: General Use

Step-by-Step Instructions

• Step 1: Choose the clay colours you want to use.
• Step 2: Squish, shape and mould the clay into your desired creation.
• Step 3: Make animals, foods or anything else you can imagine.
• Step 4: Mix colours together if you want to create new colours.
• Step 5: When you are happy with your creation, leave it undisturbed.
• Step 6: Allow it to air dry for 24 hours so it hardens and keeps its shape.

Colour Mixing Ideas

• Red + Yellow = Orange
• Blue + Yellow = Green
• Red + Blue = Purple

Important Safety Notes

• Keep the clay away from eyes.
• Wash hands after use.
• Do not eat or drink while using this product.

12. Air Dry Clay: Rainbow Rocket Ship

Make the Body

• Step 1: Take a piece of clay for the rocket body.
• Step 2: Roll and shape it into a cylinder.
• Step 3: Stand the cylinder upright.

Add the Cone

• Step 4: Take another piece of clay.
• Step 5: Shape it into a cone.
• Step 6: Attach the cone to the top of the rocket body.

Add the Legs

• Step 7: Make three small pieces of clay.
• Step 8: Shape each piece into a pointed fin or leg.
• Step 9: Attach the three fins around the bottom of the rocket.

Add the Window

• Step 10: Take a small piece of clay and shape it into a round piece.
• Step 11: Flatten it slightly to create the window.
• Step 12: Press the window onto the front of the rocket.

Let It Dry

• Step 13: Place the finished rocket somewhere safe where it will not be disturbed.
• Step 14: Let it air dry for 24 hours so it hardens and keeps its shape.
  
  

Safety:

Prefer to print it?

Download the PDF instructions for Boredom Busting Travel Activity Kit

Something missing or damaged?

Tell us the code on your box and what happened,
and we'll make it right. Get in touch.

Get another one!

This kit is available on Amazon.